Sign In | Join Free | My polstate.com
China Sinuo Testing Equipment Co. , Limited logo
Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
Verified Supplier

7 Years

Home > Switch Life Tester >

IEC 60884-1 2022 Switch Life Tester Device For Checking Non Solid Pins VDE Type Plugs Sockets

Sinuo Testing Equipment Co. , Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

IEC 60884-1 2022 Switch Life Tester Device For Checking Non Solid Pins VDE Type Plugs Sockets

Brand Name : Sinuo

Model Number : SN2114

Certification : Calibration Certificate(cost additional )

Place of Origin : China

MOQ : 1 Set

Price : Negotiable

Payment Terms : T/T

Supply Ability : 100 Sets / Month

Delivery Time : 15 days

Packaging Details : Carton

Standard Clause : IEC 60884-1:2022

Test Time : Test Time

Load Weight : 100N

Frame Material : Stainless steel

Time for Force Application : 1 min

Warranty : Free warranty

Contact Now

IEC 60884-1:2022 Device For Checking Non-Solid Pins For VDE Type Plugs Sockets

Product information For Device For Checking Non-Solid Pins:

The appliance is checked by the test of IEC60884-1:2013 clause 24, figure 14, for pins which are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a steel rod having a diameter of 4,8 mm, the axis of which is also perpendicular to the axis of the pin. During the application of the force, the reduction of the dimension of the pin at the point where the force is applied shall not exceed 0,15 mm. After removal of the rod, the dimensions of the pin shall not have changed by more than 0,06 mm in any direction.

IEC 60884-1 2022 Switch Life Tester Device For Checking Non Solid Pins VDE Type Plugs Sockets

Technical parameters For Device For Checking Non-Solid Pins:

No.: Specifications
Load weight 100N
Steel rod Φ4.8mm
Time for force application 1 minute
Equipment material Stainless steel

Operation Steps For Device For Checking Non-Solid Pins:

1. Before using it for the first time, the operator needs to be familiar with the relevant standards in order to use the test device more effectively and correctly and complete the test.

2. Put the plug and pin on the bracket according to the standard requirements, and then use the handle to lifting the weight. At this time, apply a pressure of 100N to the plug. After 1 minute, lower the lifting device and release the weight pressure. The direction of force is against the central axis of the pin, and the force is applied to the central axis of the pin through a steel rod of Φ4.8mm.

3. During the force application, the size of the position where the pin is stressed may be reduced, but the reduction value cannot exceed 0.15mm.

4. After the steel rod is removed, the dimensions of the pins should not change by more than 0.06mm.

IEC 60884-1 2022 Switch Life Tester Device For Checking Non Solid Pins VDE Type Plugs Sockets

IEC 60884-1 2022 Switch Life Tester Device For Checking Non Solid Pins VDE Type Plugs Sockets


Product Tags:

IEC 60884-1 Switch Life Tester

      

VDE Type Switch Life Tester

      
Wholesale IEC 60884-1 2022 Switch Life Tester Device For Checking Non Solid Pins VDE Type Plugs Sockets from china suppliers

IEC 60884-1 2022 Switch Life Tester Device For Checking Non Solid Pins VDE Type Plugs Sockets Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Sinuo Testing Equipment Co. , Limited
*Subject:
*Message:
Characters Remaining: (0/3000)